MMR Performance BAFFLED OIL SUMP BMW N55 (F20 F22 F30 F32) (M135i M235i 335i 435i)
It’s well documented that the N55 engine found in the M135i M235i 335i 435i is prone to oil starvation issues when pushed hard on the road and even more so when used on track.
If you're ever planning to use your car on track, or even particularly hard road driving, this really is an essential upgrade. Total engine failure is a very real possibility if not. Ask us how we know....!
The problem is especially pronounced under hard braking, when the oil pools at the front of the oil pan under the lateral g-force, allowing the pick-up to run dry. Even a fraction of a second of no oil feed can be enough to do lasting damage to your engine, any longer and it's almost certain to lead to engine failure. And that's where this Baffled Sump comes in.
The MMR Performance Baffled Sump has been extensively engineered from the ground-up to provide effective oil control, reducing surge and maintaining a more constant oil pressure; it's the ultimate bolt-in solution available to protect your engine's longevity.
Featuring a total of 7 sophisticated one-way oil control flaps and specific baffling, the T-6061 anodised MMR sump baffle has been tested over thousands of miles of track and road use where the data we collected has proven its effectiveness, plus highlighted that it's baffles correct the worst surge problems under hard braking.
Unlike other solutions available that require a plate to be welded in, the MMR solution is simply bolted into place making the addition of the baffle considerably easier and more accessible to install.
Fitment really is an absolutely essential insurance policy for any hard-driven N55 F-series car.
This product can be installed at our workshop.
Compatibility List
(N55 engine DOES NOT FIT x-Drive)
M135i
M235i
335i
435i
Please make sure you order the correct part for your vehicle, if you are unsure contact us before ordering.
Delivery Information
Worldwide postage available.
Orders are typically dispatched within 1-3 days of order being placed. If the item is out of stock this may cause delays, please check with us before ordering if this would be of concern.
Disclaimer
BM Performance Limited does not accept any liability if any damage is caused to your car by the installation of this product. Professional installation is recommended for our products. We offer installation for all products, contact us for quotation.
It’s well documented that the N55 engine found in the M135i M235i 335i 435i is prone to oil starvation issues when pushed hard on the road and even more so when used on track.
If you're ever planning to use your car on track, or even particularly hard road driving, this really is an essential upgrade. Total engine failure is a very real possibility if not. Ask us how we know....!
The problem is especially pronounced under hard braking, when the oil pools at the front of the oil pan under the lateral g-force, allowing the pick-up to run dry. Even a fraction of a second of no oil feed can be enough to do lasting damage to your engine, any longer and it's almost certain to lead to engine failure. And that's where this Baffled Sump comes in.
The MMR Performance Baffled Sump has been extensively engineered from the ground-up to provide effective oil control, reducing surge and maintaining a more constant oil pressure; it's the ultimate bolt-in solution available to protect your engine's longevity.
Featuring a total of 7 sophisticated one-way oil control flaps and specific baffling, the T-6061 anodised MMR sump baffle has been tested over thousands of miles of track and road use where the data we collected has proven its effectiveness, plus highlighted that it's baffles correct the worst surge problems under hard braking.
Unlike other solutions available that require a plate to be welded in, the MMR solution is simply bolted into place making the addition of the baffle considerably easier and more accessible to install.
Fitment really is an absolutely essential insurance policy for any hard-driven N55 F-series car.
This product can be installed at our workshop.
Compatibility List
(N55 engine DOES NOT FIT x-Drive)
M135i
M235i
335i
435i
Please make sure you order the correct part for your vehicle, if you are unsure contact us before ordering.
Delivery Information
Worldwide postage available.
Orders are typically dispatched within 1-3 days of order being placed. If the item is out of stock this may cause delays, please check with us before ordering if this would be of concern.
Disclaimer
BM Performance Limited does not accept any liability if any damage is caused to your car by the installation of this product. Professional installation is recommended for our products. We offer installation for all products, contact us for quotation.
It’s well documented that the N55 engine found in the M135i M235i 335i 435i is prone to oil starvation issues when pushed hard on the road and even more so when used on track.
If you're ever planning to use your car on track, or even particularly hard road driving, this really is an essential upgrade. Total engine failure is a very real possibility if not. Ask us how we know....!
The problem is especially pronounced under hard braking, when the oil pools at the front of the oil pan under the lateral g-force, allowing the pick-up to run dry. Even a fraction of a second of no oil feed can be enough to do lasting damage to your engine, any longer and it's almost certain to lead to engine failure. And that's where this Baffled Sump comes in.
The MMR Performance Baffled Sump has been extensively engineered from the ground-up to provide effective oil control, reducing surge and maintaining a more constant oil pressure; it's the ultimate bolt-in solution available to protect your engine's longevity.
Featuring a total of 7 sophisticated one-way oil control flaps and specific baffling, the T-6061 anodised MMR sump baffle has been tested over thousands of miles of track and road use where the data we collected has proven its effectiveness, plus highlighted that it's baffles correct the worst surge problems under hard braking.
Unlike other solutions available that require a plate to be welded in, the MMR solution is simply bolted into place making the addition of the baffle considerably easier and more accessible to install.
Fitment really is an absolutely essential insurance policy for any hard-driven N55 F-series car.
This product can be installed at our workshop.
Compatibility List
(N55 engine DOES NOT FIT x-Drive)
M135i
M235i
335i
435i
Please make sure you order the correct part for your vehicle, if you are unsure contact us before ordering.
Delivery Information
Worldwide postage available.
Orders are typically dispatched within 1-3 days of order being placed. If the item is out of stock this may cause delays, please check with us before ordering if this would be of concern.
Disclaimer
BM Performance Limited does not accept any liability if any damage is caused to your car by the installation of this product. Professional installation is recommended for our products. We offer installation for all products, contact us for quotation.