AK-Motion DataDisplay V2 (F2X 1/2 Series, F3X 3/4 Series, F8X M2/M3/M4)
AK-Motion offers a data display for your BMW that allows for a full overview of information about the vehicle at a glance. The display will be installed in the air vent inside the centre section of your dashboard in BMW Exx and Fxx series vehicles and is controlled via the touchscreen. Gxx vehicles are not supported.
The AK-Motion Data Display offers many functionalities (The functions vary depending on the engine).
Fitment would take approximately 2 hours and can be installed DIY or by us at BM Performance.
Included in the box:
Control Unit
3.5 inch display including frame
Cable set for connection to the vehicle
Display cable
1x USB cable for updating
Matte antireflection film
2x socket housing for rewiring the necessary cables to the vehicle
Features:
Activation and deactivation of Active Sound Design (F-series)
Activation and deactivation of DSC/DTC while starting the vehicle (E-series)
Activation of relays: up to four relays can be controlled with the unit
Activation of the speedometer needle when ignition on
Adjustable shift light (shown on the display or/and flash on the instrument cluster)
Air flow
Automatic and manual brightness control
Battery voltage
Boost pressure (actual value)
Boost pressure (target value)
Charge air temperature (IAT)
Compensation of scaled maps (for N54, boost pressure > 1,5 Bar)
Dashboard with eight freely selectable values
Delete – R (F-series without cat code)
DPF differential pressure
Driven distance since successful regeneration of DPF
Enable burble (F-series)
Enable diagnostic (OBD2) by Data Display
Exhaust temperature (calculated)
Firing angle
Flap control
Freely selectable boot screen
Freely selectable colour scale (e.g. oil temperature red, yellow and green)
Freely selectable speed and timing measurement
Freely selectable values which can be displayed as values or as bar diagram (up to three)
Fuel pressure
Full graphical touch-display (with 65536 colours)
Gearbox temperature (automatic and DKG vehicles. E-series and F-series)
G-Force
Ignition time
Lambda value
Lap time (displays distance and time)
OBD2-blocker function (unlock with freely selectable code!)
Oil pressure (F-series. E-series with external sensor)
Oil temperature
Optimal external sensor (oil temperature, oil pressure, exhaust temperature, …)
Power
Pressure before DPF
Rail pressure
Read and delete engine error code
Save and reset max values
Saving of the last four timing measurements
Selecting language and units (English, German, Italian, French, Dutch, Bar-PSI, PS-KW, Lambda-AFR, °C-°F, etc…)
Soot mass DPF
Speed (possible to match with GPS)
Timing 0-100
Timing 1/2 Mile
Timing 1/4 Mile
Timing 1/8 Mile
Timing 100-200
Torque
Torque compensation value (e.g. for vehicles with chip tuning or power box)
Unit is updatable
Up to four freely selectable parameters which can be displayed in the flow diagram
Waste gate position
Water temperature
This data display is compatible for:
BMW 1 Series F20/F21 - All Models
BMW 2 Series F22/F23 - All Models
BMW 3 Series F30/F31/F34/F35 - All Models
BMW 4 Series F32/F33/F36 - All Models
BMW M2/M3/M4 F8x - All Models
Delivery Information
Worldwide postage available.
Orders are typically dispatched within 1-3 days of order being placed. If the item is out of stock this may cause delays, please check with us before ordering if this would be of concern.
Disclaimer
BM Performance Limited does not accept any liability if any damage is caused to your car by the installation of this product. Professional installation is recommended for our products. We offer installation for all products, contact us for quotation.
AK-Motion offers a data display for your BMW that allows for a full overview of information about the vehicle at a glance. The display will be installed in the air vent inside the centre section of your dashboard in BMW Exx and Fxx series vehicles and is controlled via the touchscreen. Gxx vehicles are not supported.
The AK-Motion Data Display offers many functionalities (The functions vary depending on the engine).
Fitment would take approximately 2 hours and can be installed DIY or by us at BM Performance.
Included in the box:
Control Unit
3.5 inch display including frame
Cable set for connection to the vehicle
Display cable
1x USB cable for updating
Matte antireflection film
2x socket housing for rewiring the necessary cables to the vehicle
Features:
Activation and deactivation of Active Sound Design (F-series)
Activation and deactivation of DSC/DTC while starting the vehicle (E-series)
Activation of relays: up to four relays can be controlled with the unit
Activation of the speedometer needle when ignition on
Adjustable shift light (shown on the display or/and flash on the instrument cluster)
Air flow
Automatic and manual brightness control
Battery voltage
Boost pressure (actual value)
Boost pressure (target value)
Charge air temperature (IAT)
Compensation of scaled maps (for N54, boost pressure > 1,5 Bar)
Dashboard with eight freely selectable values
Delete – R (F-series without cat code)
DPF differential pressure
Driven distance since successful regeneration of DPF
Enable burble (F-series)
Enable diagnostic (OBD2) by Data Display
Exhaust temperature (calculated)
Firing angle
Flap control
Freely selectable boot screen
Freely selectable colour scale (e.g. oil temperature red, yellow and green)
Freely selectable speed and timing measurement
Freely selectable values which can be displayed as values or as bar diagram (up to three)
Fuel pressure
Full graphical touch-display (with 65536 colours)
Gearbox temperature (automatic and DKG vehicles. E-series and F-series)
G-Force
Ignition time
Lambda value
Lap time (displays distance and time)
OBD2-blocker function (unlock with freely selectable code!)
Oil pressure (F-series. E-series with external sensor)
Oil temperature
Optimal external sensor (oil temperature, oil pressure, exhaust temperature, …)
Power
Pressure before DPF
Rail pressure
Read and delete engine error code
Save and reset max values
Saving of the last four timing measurements
Selecting language and units (English, German, Italian, French, Dutch, Bar-PSI, PS-KW, Lambda-AFR, °C-°F, etc…)
Soot mass DPF
Speed (possible to match with GPS)
Timing 0-100
Timing 1/2 Mile
Timing 1/4 Mile
Timing 1/8 Mile
Timing 100-200
Torque
Torque compensation value (e.g. for vehicles with chip tuning or power box)
Unit is updatable
Up to four freely selectable parameters which can be displayed in the flow diagram
Waste gate position
Water temperature
This data display is compatible for:
BMW 1 Series F20/F21 - All Models
BMW 2 Series F22/F23 - All Models
BMW 3 Series F30/F31/F34/F35 - All Models
BMW 4 Series F32/F33/F36 - All Models
BMW M2/M3/M4 F8x - All Models
Delivery Information
Worldwide postage available.
Orders are typically dispatched within 1-3 days of order being placed. If the item is out of stock this may cause delays, please check with us before ordering if this would be of concern.
Disclaimer
BM Performance Limited does not accept any liability if any damage is caused to your car by the installation of this product. Professional installation is recommended for our products. We offer installation for all products, contact us for quotation.
AK-Motion offers a data display for your BMW that allows for a full overview of information about the vehicle at a glance. The display will be installed in the air vent inside the centre section of your dashboard in BMW Exx and Fxx series vehicles and is controlled via the touchscreen. Gxx vehicles are not supported.
The AK-Motion Data Display offers many functionalities (The functions vary depending on the engine).
Fitment would take approximately 2 hours and can be installed DIY or by us at BM Performance.
Included in the box:
Control Unit
3.5 inch display including frame
Cable set for connection to the vehicle
Display cable
1x USB cable for updating
Matte antireflection film
2x socket housing for rewiring the necessary cables to the vehicle
Features:
Activation and deactivation of Active Sound Design (F-series)
Activation and deactivation of DSC/DTC while starting the vehicle (E-series)
Activation of relays: up to four relays can be controlled with the unit
Activation of the speedometer needle when ignition on
Adjustable shift light (shown on the display or/and flash on the instrument cluster)
Air flow
Automatic and manual brightness control
Battery voltage
Boost pressure (actual value)
Boost pressure (target value)
Charge air temperature (IAT)
Compensation of scaled maps (for N54, boost pressure > 1,5 Bar)
Dashboard with eight freely selectable values
Delete – R (F-series without cat code)
DPF differential pressure
Driven distance since successful regeneration of DPF
Enable burble (F-series)
Enable diagnostic (OBD2) by Data Display
Exhaust temperature (calculated)
Firing angle
Flap control
Freely selectable boot screen
Freely selectable colour scale (e.g. oil temperature red, yellow and green)
Freely selectable speed and timing measurement
Freely selectable values which can be displayed as values or as bar diagram (up to three)
Fuel pressure
Full graphical touch-display (with 65536 colours)
Gearbox temperature (automatic and DKG vehicles. E-series and F-series)
G-Force
Ignition time
Lambda value
Lap time (displays distance and time)
OBD2-blocker function (unlock with freely selectable code!)
Oil pressure (F-series. E-series with external sensor)
Oil temperature
Optimal external sensor (oil temperature, oil pressure, exhaust temperature, …)
Power
Pressure before DPF
Rail pressure
Read and delete engine error code
Save and reset max values
Saving of the last four timing measurements
Selecting language and units (English, German, Italian, French, Dutch, Bar-PSI, PS-KW, Lambda-AFR, °C-°F, etc…)
Soot mass DPF
Speed (possible to match with GPS)
Timing 0-100
Timing 1/2 Mile
Timing 1/4 Mile
Timing 1/8 Mile
Timing 100-200
Torque
Torque compensation value (e.g. for vehicles with chip tuning or power box)
Unit is updatable
Up to four freely selectable parameters which can be displayed in the flow diagram
Waste gate position
Water temperature
This data display is compatible for:
BMW 1 Series F20/F21 - All Models
BMW 2 Series F22/F23 - All Models
BMW 3 Series F30/F31/F34/F35 - All Models
BMW 4 Series F32/F33/F36 - All Models
BMW M2/M3/M4 F8x - All Models
Delivery Information
Worldwide postage available.
Orders are typically dispatched within 1-3 days of order being placed. If the item is out of stock this may cause delays, please check with us before ordering if this would be of concern.
Disclaimer
BM Performance Limited does not accept any liability if any damage is caused to your car by the installation of this product. Professional installation is recommended for our products. We offer installation for all products, contact us for quotation.